FOREVER Toner Printable Tattoo Media Set (A + B Sheets)
FOREVER Temporary Tattoo Paper is a clear base, toner printable sheet with a special clear glue B-Sheet. Sheets are A4 or 8.27 x 11.69. NO HEAT PRESS IS REQUIRED. The A-Sheet is a clear, laser printable on almost any toner print devices without a toner savings feature, with a special water based adhesive. The printable side of the A-Paper is semi-matt. The non-printable side is printed with the FOREVER-Logo. The B-Sheet is a clear, PSA glue used to transfer tattoo to skin or other surfaces. The B-Paper has a matte and glossy side. The matte side is the backing paper and it will be disposed of after peeling it off of the A-Sheet.
NOTE: A printer with white toner will be required for use on dark skin tones, or if the desired design incorporates white areas.
Printing and Applying Instructions:
- Print your design with a laser printer on the coated side of the A-Sheet
- Peel off a corner of the white backing paper from the B-Sheet and fold it over
- Place the A-Sheet face up on a flat surface. Now stick the exposed piece of B-Sheet precisely to the corner of the A-Sheet
- Using a squeegee push the B-sheet backing paper away while rubbing over it. This applies the glue and the tattoo paper is ready for transfer
- Cut around the design as close to the design as possible (you can use a scissor or most cutters/plotters)
- Peel off the glossy part of the B-Sheet
- Position the tattoo face down on clean and dry skin
- Soak the tattoo with a wet sponge or running water until thoroughly wet, applying light pressure
- The tattoo is ready when the support paper it can be slid away without using much force.
Read More
Type: | Heat Transfer |
---|---|
Printer Compatibility: | Toner |